Transporting The Unit - Stihl FS 94 R Manual De Instrucciones

Press the throttle trigger lockout and
N
accelerate – the warm start knob
jumps to the run position F
After a cold start, let the engine warm up
with a few load cycles.
WARNING
If the carburetor has been set correctly,
the cutting attachment should not rotate
when the engine is idling!
The machine is now ready for use.
Shutting down the engine
Press stop switch – the engine
N
stops – release stop switch – the
stop switch returns to its original
position
Additional hints on starting
The engine stops in the cold start
position g.
Press the throttle trigger lockout and
N
accelerate – the warm start knob
jumps to the run position F
continue cranking in position F until
N
the engine runs
FS 94 R
The engine that is running in the cold
start position g then stops while
accelerating.
continue cranking in position for
N
cold start g until the engine runs
The engine does not start
Check if all operating elements are
N
set correctly
Check whether there is fuel in the
N
tank and refuel if necessary
Check whether the spark plug boot
N
is connected securely
Repeat the starting procedure
N
Flooded engine
Set choke level to F – continue
N
cranking until the engine runs
If the tank has been drained completely
After refueling, press the manual
N
fuel pump bulb at least five times –
even if it is full of fuel.
Set knob for warm start depending
N
on engine temperature
Motor erneut starten
N

Transporting the Unit

Using transport guard
The type of transport guard depends on
the metal cutting attachment supplied
with the machine. Transport guards are
available as special accessories.
230 mm Grass Cutting Blades
English
29