Dc Load-Break Switch; Symbols On The Inverter; Inverter Type Label - SMA SUNNY HIGHPOWER PEAK1 Instrucciones De Instalación

SMA Solar Technology AG
The one-piece enclosure lid is fastened with a screw
to an intermediate frame with crossbeam below it.
The crossbeam stabilizes the connection between
enclosure, intermediate frame and enclosure lid.

3.2 DC load-break switch

Figure 3: DC load-break switch
A DC load-break switch
INFORMATION
The PV load-break switch can be secured in the
"Off" position using a padlock.

3.3 Symbols on the inverter

Symbol Explanation
Danger to life due to electric
shock
The product operates at high
voltages. All work on the product
must be carried out by qualifed
persons only.
Danger
This symbol indicates that the
inverter must be additionally
grounded if additional grounding
or equipotential bonding is
required at the installation site.
Installation Guide
Symbol
A

3.4 Inverter Type Label

The type label uniquely identifes the inverter. You will
require the information on the type label to use the
product safely and when seeking customer support from
the SMA Service Line. You will fnd the following
information on the type label:
• Device type (Model)
• Serial number (Serial No.)
• Date of manufacture
• Device-specifc characteristics
3 Product Overview
Explanation
Danger to life due to high
voltages in the inverter; observe
waiting time.
High voltages that can cause lethal
electric shocks are present in the live
components of the inverter.
Prior to performing any work on the
inverter, disconnect it from all
voltage sources as described in this
document.
Risk of burns due to hot surfaces
The product can get hot during
operation. Avoid contact during
operation. Allow the product to cool
down sufciently before carrying
out any work.
Observe the documentation
Observe all documentation supplied
with the product.
WEEE designation
Do not dispose of the product
together with the household waste
but in accordance with the disposal
regulations for electronic waste
applicable at the installation site.
The product complies with the
Moroccan safety and EMC
requirements for electrical products.
SHP75-10-STP60-10-IA-xx-19 19