Product Overview; Front View Of The Inverter - SMA SUNNY HIGHPOWER PEAK1 Instrucciones De Instalación

Ocultar thumbs Ver también para SUNNY HIGHPOWER PEAK1:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

3 Product Overview

Damage to the enclosure seal in subfreezing
conditions
If you open the inverter when temperatures are
below freezing, the enclosure seals can be
damaged. This can lead to moisture entering the
inverter.
• Only open the inverter if the ambient
temperature is not below -5°C.
• If a layer of ice has formed on the enclosure
seal when temperatures are below freezing,
remove it prior to opening the inverter (e.g. by
melting the ice with warm air).
Damage to the inverter due to sand, dust and
moisture
Sand, dust and moisture penetration can damage
the inverter, thus impairing its functionality.
• Only open the inverter if the humidity is within
the thresholds and the environment is free of
sand and dust.
• Do not open the inverter during a dust storm or
precipitation.
• Close the inverter in case of interruption of
work or after fnishing work.
INFORMATION
Grounding conductor test prior to
recommissioning
Prior to recommissioning SMA inverters after
the installation of SMA components or power
assemblies which cannot be replaced
intuitively, ensure that the grounding conductor
in the inverter is correctly connected. The
function of the grounding conductor must be
ensured and all locally applicable laws,
standards and directives must be observed.
18
SHP75-10-STP60-10-IA-xx-19
INFORMATION
Observe superordinate standards
Prior to recommissioning SMA inverters after
the installation of SMA components or power
assemblies which cannot be replaced
intuitively, ensure that the grounding conductor
in the inverter is correctly connected. The
function of the grounding conductor must be
ensured and all locally applicable laws,
standards and directives must be observed.
3 Product Overview

3.1 Front view of the inverter

Figure 1:
Inverter with two-piece enclosure lid
The upper part of the two-piece enclosure lid is tightly
mounted. The lower part cannot be removed and
allows access to the installation area.
Figure 2:
Inverter with one-piece enclosure lid
SMA Solar Technology AG
F1
F2
F3
F4
Home
Back
OK
On
Alarm
Installation Guide
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Sunny tripower 60Shp 75-10Stp 60-10

Tabla de contenido