Movement Treadmill R4i Manual De Instrucciones página 86

OPERATIONAL INSTRUCTION
TURNING ON THE TREADMILL
The power cord is located on the front part, under the
treadmill.
At the front of the treadmill, there is a light
on/off function that should be positioned in
whenever the treadmill is idle, avoiding accidents due to
involuntary activation.
DANGER!
Never proceed or implement modifications/adaptations in electronic,
electromechanical and/or mechanical adjustment devices. They are designed
to work on the set parameters. Failure to comply with this determination may
result in injury to the user, damage to the equipment, and consequent loss of
the Warranty, in addition to freeing Brudden from any liability for any
EMERGENCY key
The emergency key
treadmill. If the sensor loosens from the equipment the
treadmill will stop its movement quickly, and then turn off
by itself. To turn on the treadmill, reconnect the sensor to
the treadmill again and press the Start button to restart the
treadmill. Always attach the emergency
clothing.
DANGER!
Do not allow third parties to approach the emergency clip while the treadmill
is in use, if the clip is released from the treadmill suddenly, the user may be
thrown forward due to sudden stoppage.
ESPAÇO
Indicamos para a segurança do
usuário a utilização de uma área
mínima de acesso e escape conforme
figura ao lado. A área de acesso e
escape pode ser comum entre as
esteiras utilizadas.
= Off = n
O I
is a safety device that accompanies the
switch with an
off function
O
key to the wearer's
60 cm
60 cm
34
LOCALIZAÇÃO DO
INTERRUPTOR
60 cm
2 m