Operational Instruction - Movement Treadmill R4i Manual De Instrucciones

OPERATIONAL INSTRUCTION

ELECTRONIC MODULE FUNCTION INSTRUCTIONS
• P0: USER training program; P1-P36 the predefined program;
• U01-U03: User-defined program,
• FAT: Body fat function.
• 5 inch LCD screen
• Speed of 1.0 ~ 14 km; h
• 0 ~ 12% slope
• Avoid overloading
• Auto check and audible alert
ELECTRONIC MODULE SCREEN
• "DISTANCE" screen: Shows the distance in numerical value.
• "CALORIES" screen: Shows the calories in numerical value.
• "TEMPO" screen: Shows the time in numerical value.
• "SPEED" screen: Shows the speed in numerical value.
• "PULSE" screen: Shows the pulse in numerical value.
• "TILT" screen: Shows the slope in numerical value.
BUTTONS INSTRUCTION:
• "PROGRAM" (BUTTON 9): Program selection BUTTON: when the belt stops, select the
cycle manually from the program to "P1-P36! U1 ~ U3!" FAT "as desired by the user.
manual program is 1.0 km / h, the fastest speed is 14 km / h.
• "MODE" (BUTTON 8): mode selection BUTTON: when the treadmill stops, configure it
as you prefer.
• You can select Time countdown, calorie countdown, distance countdown and Normal
mode.
The pattern reset is 30 minutes, when P1-P36
It is not possible to select the "FAT" cycle when in "FAT" mode.
• "START" BUTTON (BUTTON 7): When the equipment is stopped, press the "START"
BUTTON to turn on the equipment. Press the "START" BUTTON when running and the
equipment will pause the training, press again and the training will be resumed.
• "STOP" BUTTON (BUTTON 6): When the equipment is in operation it will stop the
treadmill slowly by pressing the "STOP" BUTTON once. When the LCD screen shows the
message ERR. Press the "STOP" BUTTON to clear the ERR message. When the treadmill is
in operation, press the "STOP" BUTTON twice, it will stop the treadmill quickly.
• THE "Speed +/-" BUTTON (BUTTON 5 and 6): Increase the speed or decrease it during
the race. Increases or decreases the parameters in the body fat mode.
• The "SPEED SHORTCUT" BUTTON (BUTTON 4): When the equipment is in operation,
accelerate quickly by pressing the "SPEED SHORTCUT" keys 6, 12.
• BUTTON "Incline + / -" (BUTTON 2): Increase or decrease the inclination.
• QUICK SLOPE BUTTON (BUTTON 4): Increase the slope quickly by pressing the "QUICK
SLOPE" BUTTON.
27