Do Not Work With Materials Containing Asbestos; Safety Instructions For All Saws - Dremel 670 Traducción De Las Instrucciones Originales

d. Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools and accessories. Check for misalignment or
binding of moving parts, breakage of parts and any other condition
that may affect the power tool's operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free from oil
and grease. Slippery handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected situations.
SERVICE
a. Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.

DO NOT WORK WITH MATERIALS CONTAINING ASBESTOS

!
(asbestos is considered carcinogenic)
TAKE PROTECTIVE MEASURES WHEN DURING WORK DUST
!
CAN DEVELOP THAT IS HARMFUL TO ONE'S HEALTH,
COMBUSTIBLE OR EXPLOSIVE (some dusts are considered
carcinogenic); wear a dust mask and work with dust/chip extraction when
connectable

SAFETY INSTRUCTIONS FOR ALL SAWS

CUTTING PROCEDURES (I)
a. DANGER: Keep hands away from cutting area and the blade.
!
Keep your second a hand on auxiliary handle, or motor housing. If
both hands are holding the saw, they cannot be cut by the blade.
7