Care Of Blades; Service And Warranty - Dremel 670 Traducción De Las Instrucciones Originales

CLEANING
TO AVOID ACCIDENTS ALWAYS DISCONNECT THE TOOL FROM
!
THE POWER SUPPLY BEFORE CLEANING OR PERFORMING
ANY MAINTENANCE. The Mini Saw Attachment may be cleaned most
effectively with a damp cotton swab or compressed dry air.
ALWAYS WEAR SAFETY GOGGLES WHEN CLEANING TOOLS
!
WITH COMPRESSED AIR.
Ventilation openings and switch levers must be kept clean and free of
foreign matter. Do not attempt to clean by inserting pointed objects through
openings.
CERTAIN CLEANING AGENTS AND SOLVENTS DAMAGE
!
PLASTIC PARTS. Some of these are: gasoline, carbon
tetrachloride, chlorinated cleaning solvents, ammonia and household
detergents that contain ammonia.

CARE OF BLADES

Blades become dull even from cutting regular lumber. If you find yourself
forcing the rotary tool forward to cut instead of just guiding it through the
cut, chances are the blade is dull or coated with wood pitch.
When cleaning gum and wood pitch from blade, unplug the rotary tool
and remove the blade. Remember, blades are designed to cut, so handle
carefully. Wipe the blade with kerosene or similar solvent to remove the
gum and pitch.
A dull or damaged blade slows the speed of cutting and places a heavier
load on your rotary tool, and can cause KICKBACK. Keep extra blades on
hand so you always have sharp, efficient blades ready to replace a dull or
damaged one.
Use only Dremel Saw Blades with your saw attachment.
This DREMEL product is guaranteed in accordance with statutory/country-
specific regulations; damage due to normal wear and tear, overload or
improper handling will be excluded from the guarantee.

SERVICE AND WARRANTY

15