Preventative Maintenance; Daily Maintenance; Weekly Maintenance - Matrix INDOOR CYCLING LIVESTRONG S Serie Manual De Instrucciones

PREVENTATIVE MAINTENANCE

Regular maintenance must be performed on the LIVESTRONG S-Series Indoor Cy-
cle for optimal performance and longevity. Please read and follow all instructions
below. If the indoor cycle is not maintained as described, components may wear
excessively and the LIVESTRONG S-Series Indoor Cycle may become damaged.
Improper maintenance will void the warranty terms. If you have questions about
maintenance, contact your local distributor or refer to www.indoorcycling.com
Note: Many maintenance procedures require lubricant spray.
Manufacturer recommends WD40, Brunox or any other solvent free lubricant.

Daily maintenance:

1. Make sure that the LIVESTRONG S-Series Indoor Cycle is level. If the LIVESTRONG
S-Series Indoor Cycle rocks on your floor, turn the levelling feet underneath the front or
rear stabilizer until the rocking motion is eliminated (see „How to move the LIVESTRONG
S-Series Indoor Cycle" on page 23).
2. After each user finishes exercising, the LIVESTRONG S-Series Indoor Cycle should be dis-
infected and cleaned to maintain a hygienic environment. First, apply a disinfectant spray to the
handlebars and the saddle. Using a lint-free cloth, dry the handlebars and the saddle. Next, apply
a small amount of disinfectant to a lint-free cloth and clean the adjustment knobs and the lock
handles. Avoid using strong detergents on the LIVESTRONG S-Series s Indoor Cycle fra-
me.

Weekly maintenance:

1. Apply a small amount of the lubrication spray to a lint-free cloth, and thoroughly clean
the frame, the handlebar slider and seat sliders the flywheel and the plastic parts of the
LIVESTRONG S-Series Indoor Cycle.
2. For optimal performance of the resistance
2
system, and to minimize wear on the brake pad,
the WD40 or Brunox lubricant spray should be
applied to the brake pad using the lubrication holes
on the plastic part of the brake pad or
preferably directly on the brake pad. If fuzz or lint
appears on the brake pad, the brake pad has be-
come too dry: lubricant spray should be applied
more frequently. Make sure brake pad is thoroughly
soaked from end to end with lubricant spray.
Then, wipe the excess off.
Version 1.1 2010 SBLS Copyright by Indoorcycling Group GmbH 2010 | www.indoorcycling.com ENG 24