Federal Signal Corporation 191XL Instrucciones De Instalación Y Servicio página 7

have accumulated on the explosion-proof joints and cannot be removed with solvents,
the parts should be discarded and replaced.
Never use an abrasive material or file to remove corrosive materials from
threaded surfaces. In extremely corrosive locations, equipment should be
periodically inspected to guard against unusual deterioration and possible
porosity, since this may weaken the enclosure structurally.
C. Service.
Federal Signal will service your equipment and provide technical assistance
with any problems that cannot be handled locally by Federal Signal's Distributor or
Manufacturer Representative.
Any units returned to Federal Signal for service, inspection, or repair must
be accompanied by a Return Material Authorization number with a brief explanation
of the service being requested and/or the nature of the malfunction. This R.M.A. can be
obtained from a local Federal Signal Distributor or Manufacturer's Representative.
Address all communications and shipments to:
FEDERAL SIGNAL CORPORATION
Electrical Products Division
Service Department
2645 Federal Signal Drive
University Park, IL 60466-3195
D. Replacement Parts.
Contact the factory for spare parts availability and part numbers. Typi-
cal spare parts are listed below. Due to certification, certain component parts are not
available for field replacement. Units with this type of damage must be either replaced
entirely or returned to Federal Signal for service.
Description
Globe assy., Red
Globe assy., Amber
Globe assy., Blue
Globe assy., Green
Gasket
Grease, 8 oz. Tube
Dome Guard
LED Emitter, Amber
LED Emitter, Blue
LED Emitter, Green
LED Emitter, Red
Part Number
K8449078B
K8449078B-01
K8449078B-02
K8449078B-03
K8449080B
KR81-05-01
K8449090
K147169A-06
K147169A-07
K147169A-08
K147169A-09
-5-