Taurus BABEL INVISIBLE Manual Del Usuario página 7

INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
USE:
- Extend the cable completely before plugging
it in.
- Connect the appliance to the mains.
- The LED display (F) will indicate the room's
temperature.
- Turn the appliance on, by using the on/off
button (1/a).
- The fan will start at speed 1.
- Select the desired speed.
FAN FUNCTION:
- Select the fan position.
- Select the desired ventilation speed (1-12) by
pressing the speed selection button (2/b). The
LED screen (F) will show the speed selected
for 5 seconds approximately until showing the
room temperature again.
TIMER FUNCTION:
- The appliance's operating time can be control-
led (1-12h).
- To program the operating time simply select it
using the timer buttons (4/c).
- The time programmed will show on the LED
display (F) for approximately 5 seconds. When
it switches back to the room's temperature, it
means the time has been confirmed.
- After the selected time the appliance will switch
off automatically.
OSCILLATION FUNCTION:
- The oscillation function makes it possible to
direct the flow from the apparatus so that it
automatically alternates over a range of appro-
ximately 85º.
- To activate this function, press the oscillation
button (5/d).
- To deactivate this function, follow the procedu-
re for switching it on in reverse.
WIND MODES:
- This model has three wind modes:
- Normal: The fan operates constantly at the
selected speed.
- Breeze: The fan alternates periods of more
and less power, simulating the feeling of a soft
breeze. The amplitude of these shifts depends
on the speed selected.
- Night: The fan operates at the selected speed
for approximately 20 minutes. Then it reduces
the speed by one and works at that speed
for 20 more minutes. It does that for as many
speeds as selected initially. Finally, once it
reaches the minimum speed, it operates until it
is turned off or the timer runs out.
- To activate this function, press the modes
button (3/e). The LED (F) display will show
the mode selected during approximately 5
seconds:
- NA: Breeze
- SL: Night
- Speed (1-12): Normal
- To deactivate this function, follow the procedu-
re for switching it on in reverse.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off using the on/off button
(1/a).
- Unplug the appliance from the mains.
- Clean the appliance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.