Manual Humidification While Cooking; Performing A Cooking Cycle In Manual Mode - Best For Bistrot 364 / 12 Manual De Instruccion Para La Instalacion Y Uso

2.3 MANUAL HUMIDIFICATION WHILE COOKING

While cooking, the continuous pressure on the HUMIDITY button
humidification for the time in which the button is pressed.
During the humidification process in the oven, the HUMIDITY icon
rotation of the fan/motor "reverse" changes, humidification is interrupted momentarily and then resumes if the
HUMIDITY button

2.4 PERFORMING A COOKING CYCLE IN MANUAL MODE

With the oven in ON, after having set the TEMPERATURE and TIME values, pressing the START/STOP
button will start the cooking cycle. By pressing the button, therefore, you activate the heating,
ventilation and humidification.
Pressing the START/STOP
on the TIME display (9) appears the value of the remaining time. If, however, the set time was INF, it remains
infinite.
The temperature set values remain available for more possible cooking
Subsequently, pressing the START/STOP button
While cooking:
The TEMPERATURE/PROGRAMMES display (10) shows for 4 seconds the set temperature (led
TEMPERATURE
(value measured by the probe, led TEMPERATURE icon
To change the temperature values proceed as described in section 2.1
The TIME display (9) (TIME icon lit) shows the decreasing time in hours (when set on a higher value than an
hour) and minutes, seconds (when it is set on a value less than 60 minutes).
To change the time values, proceed as described in section 2.2
If you replace the INF infinite time with a value, the counting starts from the set value and the cooking cycle
becomes timed.
Or if you replace the time value with infinite INF, the counting starts from the set value and the cooking cycle
becomes INFINITE.
If you press the START/STOP button
remaining time. By pressing the same button, the cooking resumes with the countdown where interrupted.
At the end of a timed cooking cycle (TIME icon
and heating are turned off, and a buzzer rings for 40 seconds. If, during these 40 seconds, you set a time
using the INCREASE
(TIME display (9) fixed values are no longer flashing) the oven will automatically resume the cooking
with the temperature parameters of the just completed cycle. Otherwise, by pressing the START/STOP
button the buzzer is silenced we return to the normal display: the TEMPERATURE/PROGRAMMES
(10) display shows the value of the actual temperature inside the cooking chamber (value measured by the
is pressed again.
button stops the cooking cycle at any time; the countdown is stopped and
steadily lit) and for 4 seconds the instantaneous temperature in the cooking chamber
/ DECREASE
resumes the cooking where interrupted.
flashing). These two values alternate.
during the timed cooking, it stops and it keeps in memory the
lit), the time display flashes the END writing, ventilation
buttons and confirm the value by pressing the TIME button
29
allows you to activate the manual
steadily lights up in red. In case the