Cooking Steps In A Programme; Recall Programme Already Stored - Best For Bistrot 364 / 12 Manual De Instruccion Para La Instalacion Y Uso

While the humidification is active in the oven, the HUMIDITY icon
In case the „reverse‟ fan/motor rotation is changed the humidification is momentarily interrupted and will then
resume if the two buttons are pressed again.

3.5 COOKING STEPS IN A PROGRAMME

When you choose the PROGRAMMES mode, the STEPS button
make up the programme. By pressing the button you can go from one step to the next (the step in which you
are operating is indicated by the STEPS icons
on). At each step you can modify the following parameters: time, temperature and humidity.

3.6 RECALL PROGRAMME ALREADY STORED

To recall a cooking programme already stored you need to follow these guidelines:
- A single push of the PROGRAMMES button
TEMPERATURE/PROGRAMMES display (10) (PROGRAMMES icon
appears flashing.
- With the INCREASE
- A single push of the START/STOP
cooking.
ATTENTION: A single push of the PROGRAMMES
and to return to MANUAL cooking mode. The TEMPERATURE/PROGRAMMES display (10) shows the
temperature in the cooking chamber (TEMPERATURE icon
(9) shows the time of the first switching on (00:00) (CLOCK icon
While a programme is running the display and the modification of the cooking parameters proceed as
described in the MANUAL MODE section (section 2.4).
EXAMPLE FOR SETTING A BAGUETTE-COOKING PROGRAMME
Turn the oven on with the ON/OFF button
Press the PROGRAMMES button
/PROGRAMMES display (10))
Choose the programme number to be set with the INCREASE
wait until the TEMPERATURE/PROGRAMMES display (10) stops flashing
Set the temperature by pressing the INCREASE
the desired temperature of 185°C, wait for the CHAMBER/PROGRAMMES (10) display to stop
flashing.
or DECREASE
button allows you to start the selected programme for the
(the flashing message P01 appears on the TEMPERATURE
is on steady red.
: if you are in phase 1, the F1 red light is
allows you to enter the programming mode. In the
buttons you can select the desired programme number.
button allows you to exit the programming mode
flashing) and the TIME/HUMIDITY display
lit).
or DECREASE
or DECREASE
33
allows you to see the steps that
steadily lit in green) the P01
buttons and
buttons until you reach