Programme Mode; Storage Of A New Programme - Best For Bistrot 364 / 12 Manual De Instruccion Para La Instalacion Y Uso

3. PROGRAMME MODE

The card allows 99 recipes to be stored.

3.1 STORAGE OF A NEW PROGRAMME

To store a new cooking programme you have to follow these guidelines:
- A single push of the PROGRAMMES button
TEMPERATURE/PROGRAMMES display (10) (PROGRAMMES icon
- With the INCREASE
(If the DECREASE button
programmes will appear until arriving to MAN.
When MAN is visualized, a countdown of 5 seconds will start, at the end of which you will leave the
programming mode and will enter in manual mode. )
Increase up to the desired recipe number ex. P25 and after a timeout of 5 seconds that recipe will be
confirmed (otherwise press the PROGRAMMES button
appear. The default data shown by the display are temperature 30°C, time END, humidification OFF, phase
F1.
- Now it is possible to enter or modify the temperature (section 3.2), time (section 3.3) and humidification
values (section 3.4).
It is possible to set 3 different cooking steps (F1-F2-F3) for each recipe as explained in section 3.5.
- To store the programme press the PROGRAMMES button
will be confirmed with the sound of the buzzer for some seconds and by the display showing the number of
the previously selected programme alternating with the MEM message.
A single push of the START/STOP button
ATTENTION
- A single press of the PROGRAMMES button
operating.
- A single push of the PROGRAMMES button
to MANUAL cooking mode. The TEMPERATURE/PROGRAMMES display (10) shows the temperature in
the cooking chamber (TEMPERATURE icon
value of the first switching on (00:00) (CLOCK icon
If you store the recipe in a position already occupied, you lose the previous recipe.
At any time, by pressing the ON/OFF button
saved will be lost.
or DECREASE
is pushed continuously, the decrease will be quicker, all the below
starts the cooking programme.
flashing) and the TIME/HUMIDITY display (9) shows the
the card gets in OFF and the settings which had not been
allows you to enter the programming mode. In the
buttons you may select the desired programme number.
). In the display the data associated with it will
for 4 seconds. The successful storage
allows you to view the recipe in which you are
allows you to exit the programming mode and to return
lit).
31
steadily lit in green) appears P01.