Noise And Vibration; Technical Specifications - Flex SFE 8-2 115 Instrucciones De Funcionamiento Originales

SFE 8-2 115

Noise and vibration

The noise and vibration values have been
determined in accordance with EN 60745.
The A evaluated noise level of the power tool
is typically:
– Sound pressure level L
– Sound power level L
– Uncertainty K:
Total vibration value (of the handle):
– Emission value a
– Uncertainty K:
WARNING!
The indicated measurements refer to new
power tools. Daily use causes the noise and
vibration values to change.
NOTE
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in
EN 60745 and may be used to compare
one tool with another. It may be used for
a preliminary assessment of exposure.

Technical specifications

Idling speed
Power input
Power output
Max. grinding tool diameter
Sanding head height
Weight (without power cord)
: 81 dB(A);
pA
: 92 dB(A);
WA
: 2.5 m/s
h
1.5 m/s
The declared vibration emission level
represents the main applications of the tool.
However if the tool is used for different
applications, with different accessories or
poorly maintained, the vibration emission
may differ. This may significantly increase the
exposure level over the total working period.
For a precise estimation of the vibration load
the times should also be considered during
3 dB.
which the power tool is switched off or even
running, but not actually in use. This may
2
significantly decrease the exposure level over
2
the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories,
keep the hands warm, organisation of work
patterns.
CAUTION!
Wear ear protection at a sound pressure
above 85 dB(A).
Machine type
m/s
W
W
mm
mm
kg
Flat head sander SFE 8-2 115
700–2300
800
325
115
13
2.5
15