Maruyama BC360HT Manual Del Propietario - Operador página 5

ASSEMBLY INSTRUCTIONS
ENGINE AND SHAFT ASSEMBLY
Attach the clutch drum housing to the engine using the four screws.
HANDLEBAR
1. Loosen the four screws on the top of the clamp bracket.
2. Insert the left and right handlebars into the clamp bracket.
Both handles should be inserted up to arrowed line.
STOP SWITCH WIRING
1. Remove the air fi lter cover.
2. Plug the stop switch wires into the matching connectors from the
engine. Note that wire polarity is not important.
[BC360HT, BC360HE]
3. Lap and fi x the stop switch wires and connectors with clamp.
Handlebar
Clamp
Bracket
＿ US-3 ＿
Engine
Screw（4）
Clutch Drum Housing
Screw（4）
Clamp Bracket
Handlebar
Stop Switch Wires
[BC360HT, BC360HE]
Clamp