Safety Instructions - Maruyama BC360HT Manual Del Propietario - Operador

1. Read and understand this Owner's/Operator's Manual before using the brushcutter. Be thoroughly fa-
miliar with the proper use of the brushcutter.
2. Never allow children to operate the brushcutter. it is not a toy. Never allow adults to operate the unit
without first reading the Instruction Manual.
3. Become familiar with the controls and know how to stop the engine quickly.
4. ALWAYS WEAR SAFETY GLASSES or other suitable eye protection, and hearing protection.
5. Keep the area of operation clear of all persons, particularly small children and pets.
6. Never operate a brushcutter when you are fatigued.
7. Never operate without proper guards or other protective safety devices in place.
8. Dress properly; do not wear loose clothing or jewelry. They can be caught in moving parts. Always wear
substantial footwear, long pants and long sleeved shirt.
9. Gasoline is highly flammable; handle it carefully. Fill the fuel tank with the correct mixture of gasoline
and oil before trying to start the engine.
10. Use an approved fuel container to store the gasoline/oil mixture.
11. Do not fill the tank when the engine is hot or running.
12. Do not smoke while handling gasoline.
13. Fill the fuel tank outdoors and up to about 10mm from the top of the tank, not the top of the filler neck.
14. Wipe any spilled gasoline before starting the engine.
15. The Exhaust gases are extremely hot. Keep flammable materials and objects at least 1m away from the
direction that the exhaust gases are coming out of the muffler. Do not cover the exhaust gases with any
items. There is a high risk of materials and objects catching fire and getting burned.
16. During the operation and idling of the unit, the engine is very hot. Also, for a while after the engine stops,
the engine is still hot. Do not place the engine near flammable materials such as dried grass. There is
a high risk of materials catching fire.
17. Always be sure of your footing; keep a firm hold of the handles with both hands, and walk, never run.
18. Use the right tool for the job. Do not use the brushcutter for any job that is not recommended by the
manufacturer.
19. Keep all fasteners tight to be sure the brushcutter is in safe working condition. Follow the maintenance
instructions provided on page US-8 of this manual.
20. Do not put hands or feet near or under the rotating parts.
21. Keep clear at all times.
22. If the brushcutter should start to vibrate abnormally, stop the engine and check immediately for the
cause. Vibration is generally a warning of trouble.
23. Do not trim too close to the ground in order to avoid hitting small stones or other debris. Avoid using the
brushcutter near rocks, gravel, stones and similar matter.
24. Use the brushcutter only in daylight or good artificial light.
25. Shut off the engine and be certain the cutting blade has completely stopped rotating before inverting the
machine.

SAFETY INSTRUCTIONS

＿ US-1 ＿