Maintenance - MyTek 3204 Instrucciones Importantes De Seguridad

Maintenance

Replace the water periodically. Remove the cover from the drain plug(L) located at the bottom
of the Cooler. After the water in the water tank is drained, put the plug(L) back and
fill the water tank with new water. Wipe the dirt and dust on the surface of the device with a wet cloth.
For best performance, turn on the Cooler and turn off the cooling water pump to dry the honeycomb
cooling pads 15 minutes before turning off the device.
* Please disassemble or clean the appliance only after water is drained and the power cord is unplugged.
* P lease drain all the water in the tank and dry the Honeycomb Cooling Filters, if the appliance will not be
used for an extended time.
* T he cleaning frequency for the Honeycomb Cooling Filters depends on local air and water conditions.
* I n areas where water mineral content is high, deposits may build up on the Honeycomb Cooling Filters
and restrict the air flow.
* I t is recommended that cleaning and draining the water tank, and then refilling it with clean fresh water
once a week may help reduce mineral deposits. If mineral deposits build up on the Honeycomb Cooling
Filters, please remove the pads and wash them gently under fresh water.
* N ever use corrosive elements or chemicals to clean this product.
* W hen the unit is not in use, please store the Cooler in a dry place away from direct sun.
13
L