Operation Introduction - MyTek 3204 Instrucciones Importantes De Seguridad

Operation Introduction

Manual water tank replenishment:：
The water tank can be filled directly from ice compartment (D) on the top, or be replenished
with water from melt ice.
D
To see when the water tank is full, check the "water level indication window (K)" behind the Cooler.
* Do not add water or ice when the water level is at its
maximum; otherwise excess water will leak from the
water tank.
K
* Please pay attention to the warning light of the water level
switch from time to time. When the red-light blinks, add
water. The pump may be damaged when the Cooler mode
is running without water for a long time.
*Do not add dirty water or salt water to the water tank. This
may damage the pump equipment and honeycomb cooling
filters. Water capacity means the total amount of water that
can be contained in the water tank and water distribution
system of the Cooler.
12
Open the water injection door and insert
a water pipe of a proper size (the water
pipe needs to be inserted a little deeper
to prevent it from bouncing back because
of counterforce).