Control Panel Functions - MyTek 3204 Instrucciones Importantes De Seguridad

Control Panel Functions

Function of control panel (
time switch
rotation switch
[ON/OFF]
When the Cooler is plugged, press this button to turn on the
Cooler. The low-speed indicator lights on and a beep sound
indicates that the Cooler is turned on. Press this button again
to turn the Cooler off. The indicator lights off and a long beep
indicates the Cooler is off.
[Cooling mode]
If you want to use the cooling mode, you need to add water before turning on
Note:
Cooler
. To enhance the cooling effect, add ice after water.
When the Cooler is on, press this button to turn on the water cooling function (green light on);
press again to turn off the water cooling function (light off). Low water level warning: If there is no
water in the water tank or the water level is too low when the water cooling function is on, the red
light will blink.
[Wind speed switch]
When the Cooler is on, it starts with a low speed and the low-speed indicator is on.
Press this button again to switch to medium-speed mode.
Press this button again to switch to the high-speed mode.
→ medium-speed
Low-speed
[Rotation switch]
When the Cooler is on, press this button to start automatic Cooler louver rotation (indicator on).
Press this button again to stop the rotation (indicator off).
[Time switch]
When the Cooler is on, press this button (indicator on) to set the timer. With each press, you can
choose from seven durations in the following sequence:
[1h] → [2h] → [1+2h] → [4h] → [1+4h] → [2+4h] → [1+2+4h]
[Precautions for using the Cooler]
Be sure to place the Cooler properly before installation and use.
If the cooler is operated with insufficient water in the water tank, the pump will malfunction easily.
Note :Please be sure to unplug the power before refilling or emptying the water tank.
remote control same)
indicator
cooling mode
ON/OFF
wind
speed switch
→ high-speed cycle
11
Remote control
rotation switch
cooling mode
ON/OFF
push
1
open 2
Before using the remote control, pull out
the transparency. The remote control
works on one "CR2025" battery(included).
the
.
time switch
wind speed
switch
Put the battery
in right position
to prevent
damaging
the remote
control.