MyTek 3204 Instrucciones Importantes De Seguridad página 15

Clean water tank
To clean the water tank(C) , please follow the steps (1) to (3) below to learn how to remove it from
the Cooler for cleaning; if you want to put the water tank back, reverse the steps from (3) to (1).
Steps to remove the water tank:
(1) (2) Pull out the latches at the two ends of the water tank.
(3) Lift the upper part of the Cooler to separate the water tank for subsequent cleaning. (Be careful
not to hit the water pump and bracket when placing the Cooler aside). Use a towel or soft brush with
a little bit of detergent to wipe the scale in the water tank or clean with water. Because the upper
part of the Cooler contains an electronic display panel, do not wash it directly with water. You can
use a mild detergent and a soft cloth to wipe the body and the panel.
To put the water tank back:
(3) Lower the upper part of the Cooler into the water tank.
(2) (1) Buckle the upper part of the Cooler with the latches at the two ends of the water tank.
C
15
Bracket
Water pump