Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3400 Control Panel Functions
display
panel
[ON/OFF]
When the Cooler is plugged in, you may touch this button to switch the
Cooler on. The default "L" on the display panel indicates the minimum
wind speed, while a "beep" sound indicates that the Cooler is turned on.
You may touch this button again to switch the Cooler off. As the indicator
light goes out, a long "beep" indicates the Cooler is turned off.
If you want to use the cooling mode, you need to add water before turning
Note:
on the Cooler. To enhance the cooling effect, add ice after water.
[Cooling mode]
While the Cooler is on, you may touch this button to switch on water cooling mode, and a green
indicator light indicates that the water-cooling mode is on; touch the button again to switch off cooling
mode and the indicator light goes out. Low water level warning: When the cooling mode is on, the
orange indicator light will flash if the water tank has no water or the water level is too low. It will beep
for one minute before the cooling mode is automatically turned off.
[Ozone mode]
When the Cooler is on, you may touch this button to turn on the automatic ozone sterilization mode,
and a green indicator light indicates that the ozone mode is on; touch again to turn off the ozone mode
and the indicator light goes out. When the water tank has no water or the water level is too low, the
indicator light will turn orange and flash, and the cooling mode will be automatically turned off and the
ozone mode cannot be switched on.
[Rotation switch]
When the Cooler is on, you may touch this button to automatically change wind direction horizontally
(left and right), and a green indicator light indicates this mode is on; touch again to turn off this
function and the indicator light goes out.
[Wind Speed Increase]
When the Cooler is on, you may touch this button to increase wind speed from low to high:
L→2→3→4→5→6→7→H→two beeps indicating the maximum wind speed.
[Wind Speed Decreases]
When the Cooler is on, you may touch this button to decrease wind speed from high to low:
H→7→6→5→4→3→2→L→two beeps indicating the minimum wind speed.
Control panel function
(remote control same)
Indicator light
rotation
cooling
switch
mode
wind
ozone
speed
mode
increase
wind
speed
decrease
ON/OFF
13
Remote control
function
cooling mode
ozone mode
rotation switch
wind speed
increase
wind speed
decrease
ON/OFF
Put the battery
in right position
to prevent
push
damaging
1
the remote
open
2
control.
Before using the remote control, pull out
the transparency. The remote control
works on one "CR2025" battery(included).
Capítulos
Tabla de contenido
