Safety Instructions; Cutting Equipment; Sharpening Grass Knifes And Grass Blades; General Working Instructions - Husqvarna J-handle barrier 536LiLX Manual De Instrucciones

Cutting equipment

This section describes how to choose and maintain your
cutting equipment in order to:
• Reduce the risk of kickback.
• Obtain maximum cutting performance.
• Extend the life of cutting equipment.
IMPORTANT!
Only use cutting attachments with the guards we
recommend! See the chapter on Technical data.
Refer to the instructions for the cutting attachment to
check the correct way to load the cord and the correct
cord diameter.
Keep the teeth of the blade correctly sharpened! Follow
our recommendations. Also refer to the instructions on
the blade packaging.
The blade should be completely stationary once the
throttle has returned to its original position.
WARNING! Always remove the battery
!
before you work on any part of the
cutting equipment. It continues to rotate
even after the throttle control has been
released. Check that the cutting
equipment has stopped completely and
remove the battery before you start any
work on it.
Using an incorrect cutting attachment or
an incorrectly sharpened blade
increases the risk of blade thrust.
Always wear approved protective gloves.
General rules
Only use cutting attachments with the guards we
recommend! See the chapter on Technical data.
Keep the cutting edge properly sharpened! Follow our
instructions and use the recommended sharpner. A
damaged or badly sharpened blade increases the risk of
accidents, snags and thrust.
Keep the teeth of the blade correctly sharpened! Follow
our instructions and use the recommended file gauge. An
incorrectly sharpened or damaged blade increases the
risk of accidents.
4 – English

SAFETY INSTRUCTIONS

Check the cutting attachment for damage or cracks. A
damaged cutting attachment should always be replaced.
WARNING! Using an incorrect cutting
!
attachment or an incorrectly sharpened
blade increases the risk of blade thrust.
WARNING! Always discard a blade that is
!
bent, twisted, cracked, broken or
damaged in any other way. Never attempt
to straighten a twisted blade so that it
can be reused. Only use original blades
of the specified type.
Sharpening grass knifes and
grass blades
• See the cutting attachment packaging for correct
sharpening instructions. Sharpen blades and cutters
using a single-cut flat file.
• Sharpen all edges equally to maintain blade balance.

General working instructions

Terms
• Brush cutting is a general term for clearing grass.
Grass blades and grass cutters are used for this
purpose.