Events
The On option activates the event for 10 minutes; to extend it to the desired time, press the Copy
button (the procedure is similar for the Off option).
Confirm with Save.
If there are any days to which you want to assign the same time, use and to select the day
from which to copy and press Copy from; use and to select the day from which to copy the
programming and press Copy.
Press Confirm (button L).
7.3.3 Periodical clock.
This enables activating and deactivating the event at most two times for each day of the week
setting the time in steps of 1 minute.
With Select you choose the day of the week that you want to programme.
Using the
(button G),
STOP times.
Confirm with Save.
If there are any days to which you want to assign the same time, use and to select the day
from which to copy and press Copy from; use and to select the day from which to copy the
programming and press Copy.
Press Confirm (button L).
7.3.4 Cyclic clock.
This enables cyclically repeating the activation/deactivation (On-Off) of an event according to the set
duration independently of the day, date and time.
Using the
(button G),
groups (functions) associated with the event will stay On and the time for which they will remain Off.
Confirm with Save.
7.4 Viewing the structure of an event.
(press button D on the control panel)
Main menu Others
The display shows
Prog 01
push-buttons (buttons B and D) select the desired event.
Press Details (button A) to view the structure of the chosen event.
On the left there is a list of the inputs (IN1 and IN2) and outputs (OUT1 and OUT2) of the event, the
selected conditions and the icon identifying the type of operation (only activation, only switching off, etc.).
To exit the menu, press the Back button a number of times (button E).
(button H) and Set (button I) buttons, set the desired START and
(button H) and Set (button I) buttons, set the time during which the
(highlighted in orange); using the
(press button A).
Events
and
Programme
Programme
53
53