Hvac - Vimar By-me Guía De Usuario

Hvac

3. HVAC.
The HVAC menu is used to read off the control panel the temperature measured by the various ther-
mostats and to change the type of operation or the temperature setting of each single thermostat.
In addition, again with the control panel, it will be possible to operate each thermostat in a completely
similar way to that of a timer-thermostat (AUTO mode), setting the operating temperature and the
relevant time bands
.
15.01.2011 Main menu
Climate
To call up
the Application
press
corresponding
Button
Scenes
Logout Setup
3.1 Viewing the temperature of the thermostats in the different zones of the house.
(press button A on the control panel)
Main menu  HVAC
Zone 01 is displayed; with
perature zones in the house one by one.
For each zone the display shows:
• the measured temperature;
• the state of the thermostat (On if it is working to take the temperature up to the setting, Off if the
temperature has been reached);
• the heating mode (Heating
• the type of operation (Manual, Automatic, Timed Manual, etc).
Then press the Menu button (button E) to return to the Main Menu.
38
05:57
Audio
Others
Fig. 7
 and  buttons (buttons G and H) you can view all the tem-
Zone Zone
or Air-Conditioning
Thermostat 01
Zone 01
Thermostat 01
Operation
Menu Setup Zone

);
14:58
Temperature
Temperature
Zone
