Vimar By-me Guía De Usuario página 44

Hvac
One of the zones is displayed.
Press Setup (button F); if required, select your user name with  and  and enter the password.
Programming Temperature Zone  Select
Use  and  to select the zone you want to programme and confirm by selecting LEVELS T.
Use  and  to select the desired operating mode (Heating or Air-Conditioning) and confirm with
Select.
Then set the three desired temperature levels and confirm with Save.
Note: Generally T1<T2<T3.
Then proceed with the hourly programming of the levels T for every day of the week.
Select Program .
Use  and  to select the desired operating mode (Heating or Air-Conditioning) and confirm with
Select.
The control panel display will show the days of the week with the times of the set temperature alongside:
a) select the desired day with  and  and confirm with Select.
- Using  and
T3 already set (displayed at top right). Each time the buttons are pressed the time interval
moves 20 minutes.
- Press T  to select the level T1, T2 or T3 to change that is associated with the 20 minute
time band previously selected (for instance, from 7.40 to 8.00 a.m.).
- Repeat the previous operations for the time bands you want to change.
- Press Confirm to save the programming of the selected day. Pressing Back a number of
times exits the menu without saving the settings.
b) If you want to copy the entire day's programming to another day of the week, use  and 
select the day to programme and press Copy from; then using  and  select the day from
which to copy the programme, press Copy and confirm with YES.
After programming all the days of the week, press Save.
40
 scroll through the 24 hours of the selected day to view levels T1 T2 and