Scenarios - Vimar By-me Guía De Usuario

Scenarios

6. SCENARIOS.
This menu enables creating, changing and activating the scenarios of the home automation system.
A scenario can be compared to a "photograph" of the house (or part of it) in a specific situation and
can include lights (on/off), dimmer (brightness), roller shutters (up/down), thermostats (mode and
temperature settings) and audio (source and volume).
After being configured, the scenarios are saved in the control panel and in the devices involved; they
can be called up from the control panel, with the push-buttons, remote controls and even with simple
SMS text messages (in this case there must be a GSM communicator).
The scenarios can only be activated and they take the system into the situation saved previously;
naturally, after activating a scenario, it is possible to change status manually by using the devices.
The control panel is able to save up to 32 scenarios of which 4, at your choice, can be acti-
vated from the main screen of the scenario menu; to this regard, ask your installer to associate
the four scenarios that you will use most often with the first screen of the menu.
N.B. If no association is made, the control panel automatically assigns the first 4 scenarios of the list
of the 32 available ones with the main screen.
Bear in mind that each function (called "group" on the control panel) can be associated with
at most 4 different scenarios; if this limit is exceeded the control panel displays an error mes-
sage. It is therefore useful to note down the functions associated with the scenarios so as not
to run into this eventuality. Lastly, bear in mind that in the scenarios it is not possible to set
roller shutters that remain half open.
15.01.2011 Main menu
Climate
To call up
the Application
press
corresponding
Button
Scenes
Logout Setup
6.1 Activating the four scenarios used most often.
Main menu  Scenarios
Press the button on the control panel (A, B, C or D) corresponding to the scenario you want to
activate.
Then press the button on the control panel corresponding to the Menu (button E) to return to the
Main Menu.
48
05:57
Audio
Others
Fig. 15
(press button C on the control panel)
Scene Control
Scene 1
To call up
the Application
press
corresponding
Button
Scene 2
Menu Setup
05:54
Scene 3
Scene 4
Others