Modifying A Scenario - Vimar By-me Guía De Usuario

Scenarios
For roller shutters/shutters/curtains, use the up/down buttons to select the end position that they
need to have in the scenario.
For the temperature/thermostated zones, select the desired operation mode (for example Automatic,
Manual 22.5°C) on the thermostats involved in the scenario.
Finally, for the audio zones, select the desired source (RCA input, ipod docking station, etc.) and in the
case of an FM radio, also select the desired FM station and then the listening volume.
Press Memo (button I) and finally confirm with Save (button L).
Note. If the system includes a GSM communicator, on selecting Remote activation = YES the sce-
nario can be activated with an SMS text message.
If the system is interfaced with another By-me system, on selecting Scenario type = Global the
activation of a scenario will trigger the activation of the corresponding global scenario of the By-me
system interfaced with the first one.

6.4 Modifying a scenario

Scenarios are normally modified by the installer or by a user he has enabled.
Main menu  Scenarios
Using the push-buttons  and  select Scenario Management and press Select (button I on the
control panel) to confirm.
Using the  and  buttons, select the scenario to modify.
Now, if you want to change the functions (groups) associated with the scenario, follow the procedure
in point 1); if instead you only want to change the states of the functions associated with the scenario,
see point 2).
1) Using the push-buttons  and  select Associated Groups and press Select (button I on the
control panel) to confirm.
Add or remove the groups by pressing Select or Remove (press button I on the control panel).
Confirm with Save and then manually set the final state of the functions as done before (in this
phase the button LEDs will blink).
Confirm with
Save.
2) Using the push-buttons  and  select Setting Scenario and press Select (button I on the
control panel) to confirm.
Manually set the final state of the functions as done before (in this phase the button LEDs will
blink).
Confirm with
Save.
Note. A scenario created as normal cannot be changed into global and vice versa. To do this it is
therefore necessary to delete the scenario and create it again.
50
(press button C on the control panel)  Setup (press button F).