Vimar By-me Guía De Usuario página 56

Events
Press Management (button C) to display the screen related to the selected event and press Stop
(button B) to stop it.
When the event is stopped, the Stop push-button is automatically replaced by Restart; therefore,
when you want to activate an event manually, it is sufficient to repeat the procedure illustrated above
and press the Restart button (button B).
To exit the menu, press the Back button a number of times (button D).
7.2 Controlling the outputs associated with an event.
This function is useful to verify the state of the outputs or to activate them; for example, it will be pos-
sible to activate garden watering in a different time interval to the programmed one.
(press button D on the control panel)
Main menu  Others
The display shows Prog 01 (highlighted in orange); using the Programme
push-buttons (buttons B and D) select the desired event.
Press Management (button C) to display the screen related to the selected event:
a) Press Activate outputs (button A) to activate the outputs associated with the event.
b) Press Deactivate outputs (button C) to deactivate the outputs associated with the event. This
option only applies if the output is associated with a scenario (it can in fact only be activated).
To exit the menu, press the Back button a number of times (button D).
7.3 Changing the times for activating/deactivating events.
Main menu  Others (press button D on the control panel)
Press Setup (button F); select your user name with  and  and enter the password.
Using  and  select the event to change (saved programmes) and confirm with Select.
Using  and  select Time. and confirm with Modify.
Select the time with  and  and press Select.
ATTENTION: Never carry out any operations on IN1, IN2, OUT1 and OUT2.
7.3.1 No timing.
This disables all timing (the event is not bound to schedules/times).
7.3.2 Weekly clock.
For each day of the week, this enables activating an event at intervals of 10 minutes (minimum time).
Select activation (On) or deactivation (Off) with the On/Off button and use 
through all 24 h.
52
(press button A).
 Events
and Programme
 Events (press button A).
and  to move