System Setup - Gima ECG 300G Manual De Instrucciones

In current interface, user can switch the items via
content of the item by

7.8 System setup

In the main interface, click
After clicking "Default", the system will restore all settings to default. The optional content
of each setting item and its description are shown in the following table:
Item
[None]/[30Seconds]/[1
ScreenSaver Minute]/[2 Minutes] /[5
Minutes]/[10 Minutes]
[30Seconds]/[1
Minute]/[2 Minutes] /[5
Back-light
Minutes]/[10
Minutes]/[Always On]
[None]/[1 Minute]/[3
Minutes]/[5
Minutes]/[10
Auto Off
Minutes]/[15
Minutes]/[30
Minutes]/[60 Minutes]
[None]/[Only
Low Power
once]/[Always]
[50Hz/35Hz]/[50Hz/25
Hz]/
Filter Freq
[60Hz/25Hz]/[60Hz/35
Hz]
[English]/[Chinese],
Language
etc.
K-B Sound on/off
and buttons.
to enter the system setup interface, as shown below:
Options
If there is no operation after reaching the set time,
screen saver will be active. If it is set to "None",
this function will not be used..
If there is no operation after reaching the set time,
screen backlight will turn off. If it is set to
"Always On", the backlight will always keep on.
If there is no operation after reaching the set time,
the system will automatically turn off. If it is set
to "None", the system will always keep on.
It determines the alarm method that the device
uses in low power.
To set the parameters of AC filter and EMG
filter.
To set the default language of system.
If it is selected, the button makes sound while
pressing, otherwise, there will be no sound.
and
Description
26
buttons, and adjust the