Gima ECG 300G Manual De Instrucciones página 122

Type Item
Print
Mode
Lead
Gain
Auto
Strip
Rhythm
General Strip
setup
Average
QRS
Auto-Di
agnosis
Period
Advance Print-Sa
setup ve
Note 1: The settings of auto strip, rhythm strip, average QRS, auto diagnosis and
periodic print are only optional in auto mode and rhythm mode.
Options
[Auto 4×3]/[Auto 3×4+1]/[Auto
3×4]/[Auto 2×6+1]/[Auto
2×6]/[Auto 3-2+1]/[Auto
3-2][Rhythm 4]/[Rhythm
3][/Rhythm 2]/[Manual]
[Smart]/[Current]
[3 sec]/[4 sec]/[5 sec]/[6 sec]/[8
sec]/[10 sec]/[15 sec]/[20 sec]/[25
sec]/[30 sec]
[10 sec]/[15 sec]/[20 sec]/[25
sec]/[30 sec]
[2×6]/[2×6+ Mark]/[3×4]/[3×4+
Mark]/[4×3]/[4×3+ Mark]/[None]
[All]/[Data]/[Conclusion]/[None]
[per1Min]/[per
2Min]/[per3Min]/[per5Min]/[per1
0Min]/[per20Min]/[per30Min]/[p
er 60 Min]/[Off]
[Print and Save]/[Print
Save]/[Save no Print]
The system takes the selected option
as default print mode.
The option selected will be used as
printing gain mode. "Smart" means
the system will adjust gain
automatically to fit paper height;
"Current" means it will use screen
waveform gain as that of printing.
The system takes the selected option
as the print time length of each strip.
When "Print Mode" is set to
"Rhythm 2" "Rhythm 3" or
"Rhythm 4", the system takes the
selected option as the print time
length of each waveform.
When "Print Mode" is set to "Auto"
or "Rhythm", the system uses the
selected format to print the average
QRS waveform.
The diagnosis contains data and
conclusion two parts, which can be
chosen by user as demand.
During the ECG acquisition process,
the system will automatically
activate the printing operation
according to the selected time
interval. When the printing mode is
manual mode, the printing will
output "Auto 3×4+1" format,
otherwise, it will output according to
the current setting mode.
User can choose to print or save the
no
case after pressing PRINT button
during sampling.
29
Description