Sampling Setup; Analysis Parameters Setup - Gima ECG 300G Manual De Instrucciones

Demo Mode on/off

7.9 Sampling setup

In the main interface, click
After clicking "Default", the system will restore all settings to default.
The optional content of each setting item and its description are shown in the following
table:
Item
AC Filter
[ON]/[OFF]
EMG Filter
[ON]/[OFF]
DFT Filter
[ON]/[OFF]
Info Input [Before]/[After]/[None]
Show Style
[3 Leads]/[6 Leads]/[12
Leads]
Show Gain [5mm/mV]/[10mm/mV]/[20
mm/mV]
Show Speed [12.5mm/s]/[25mm/s]/[50m
m/s]

7.10 Analysis parameters setup

In the main interface, click
shown below:
The setup here will affect real-time analysis during sampling, case review and diagnosis
prompt of print report.
If it is selected, the system will run in Demo
mode; otherwise, the system will run in sampling
mode.
to enter the sampling setup interface, as shown below:
Options
to enter the analysis parameters setup interface, as
Description
Turn on or off the AC filter.
Turn on or off the EMG filter.
Turn on or off the Baseline filter.
Set to input the case information before or
after sampling, or not input
Set the display method of ECG.
Set the gain of displayed ECG.
Set the speed of displayed ECG.
27