Handling Weights - Husqvarna HTC 950 RX Manual De Usuario

Operation
The grinder can also be moved short distances using the inbuilt battery drive and with
the support wheel mounted. The battery capacity is sufficient to transport the machine
for ca. 30 minutes.
Figure 4-5. Fitting the support wheel
4.5

Handling weights

The machine is equipped with two weights to make it easy to move the machine's centre
of gravity. Each weight is provided with two locking pins with which the weights can be
lowered and locked in three positions; forward, up (normal position) and backwards.
• Pull each pin out and lock in the extracted position by turning in the direction of
the arrow, see Figure 4-6, page 21.
Warning!
There is a risk of crush injuries when the weights are folded back, since these
are not locked in this position.
Warning!
Always make sure that the locking pins lock properly when the weights are
placed in the desired position.
20
HTC 950 RX
5.0