Operation; General - Husqvarna HTC 950 RX Manual De Usuario

Operation

4 Operation
4.1

General

The following section describes how to change tools and how to operate the grinding
machine. This section does not deal with the technical aspects of grinding, such as
selection of grinding tools, etc.
For choice of tool, go to HTC's website
information.
Warning!
The machine may only be used or repaired by personnel who have received the
appropriate theoretical and practical training and who have read this manual.
Warning!
Use protective equipment such as safety shoes, safety goggles, protective
gloves, breathing mask and hearing protection.
Warning!
Always use the dust extractor in an environment where there is no risk of
explosion and fire. Familiarise yourself with and follow the relevant fire safety
regulations when using the machine.
Warning!
Make sure there are no loose objects in the work area. If loose objects get under
the grinding head, these may be flung out and cause personal injury.
Warning!
Use protective equipment according to the label on the machine.
Warning!
Only start the machine with the grinding head lowered.
Warning!
The machine must only be used and moved on level surfaces. There is a risk of
crush injuries if the machine starts to roll.
Warning!
The operator must never leave the machine unattended.
Tip!
Check the minimum recommended cable area before using an extension cord.
You will find the recommended cable area under Technical Data.
16
www.htc-floorsystems.com
HTC 950 RX
for more
5.0