ResMed Hospital Trolley Guia Del Usuario página 6

Hospital trolley storage bin
The trolley storage bin is designed to hold patient masks, additional
circuits and any other loose accessories that need to be stored with
the trolley (To a maximum weight limit of 2kg).
It is comprised of:
• Storage Bin
• M5 screws x4
• 3 mm hex key.
To attach the storage bin:
(Fitting and assembly parts shown in illustration D).
1. Position the trolley bin at the front of the centre console and align
the screw holes.
2. Secure the bin in position using the screws and hex key.
Hospital trolley cylinder mount
The cylinder mount is designed to hold one cylinder of up to B5/E
size. It is comprised of:
• Cylinder mount base
• Bracket strap
• M6 screws x4
• M5 screws x2
• 3 mm hex key
• 5 mm hex key.
To attach the Cylinder mount:
(Parts for fitting and assembly shown in illustration E).
Ensure the trolley is empty and no therapy devices are attached.
1. Tip the trolley on its side to expose the underside.
2. Position the cylinder mount base on the underside of the trolley.
3. Secure the cylinder mount base using the M6 screws and
3 mm hex key.
4. Return the trolley to the upright position and ensure the wheels
are locked.
5. Secure the bracket strap to the trolley rear panel using the M5
screws and 5 mm hex key.
Fitting an oxygen cylinder
1. Place the oxygen cylinder upright on the cylinder mount base.
2. Wrap the bracket strap around the oxygen cylinder and tighten to
secure.
3. Connect the oxygen line from the cylinder to the oxygen inlet
port on the Astral device.
Note: Ensure the oxygen cylinder manometer is visible.
4