Install Appliance; Mount To Cabinet - Gaggenau BS 470/471 612 Instrucciones De Instalación

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

en-us
Preparing Kitchen Units

Install Appliance

Note: The appliance is heavy. It is advisable to install it
with a second person.
NOTICE
Before installing the appliance, be sure to verify the
cabinet dimensions and electrical connections.

Mount to Cabinet

When installing two appliances next to each other:
Both recessed handles must face toward the center.
Secure the appliance against tilting in the cupboard if
there is not intermediate shelf above the appliance:
fasten two commercially available brackets on both
sides inside the cupboard (at 17
/
" (5 mm) above appliance height).
3
16
Before installing, remove the transport brackets for
the supply and drain water hoses.
1.
Push the appliance fully into the kitchen unit. Route
the Combi-steam oven's connecting cable and supply
and drain water hoses to the connection points on the
rear left in the kitchen unit.
10
/
" (450 mm) deep,
3
4
Do not kink or jam connecting cables and hoses or
route them over sharp edges.
2.
Align the appliance in the center.
Tabla de contenido
loading

Este manual también es adecuado para:

Bs 474/475 612Bs 484/485 612

Tabla de contenido