Remember that new brake pads must be broken in. They are broken in
by riding for a few minutes and alternating between sudden stops and
light braking.
Replacing the brake pads
Remove the wheel and remove the worn pads from the brake caliper.
Position the new pads in the caliper so that the braking surfaces come
into contact. Do not touch the braking surfaces. Insert the pads one
after the other into the brake caliper. Then adjust the brakes as shown
above.
3. Wear of the wheel rims
Like any part subject to wear, the wheel rim should be checked
regularly. The wheel rim can weaken and break, causing you to lose
control and fall.
WARNING: it is very important to check the wear of the
wheel rims. A damaged wheel rim can be very dangerous
and must be replaced.
62
EN