General Information - Spanset Spectre Harness 2 Manual Del Usuario

The free space must be sufficient to allow the fall arrest event
to occur without the potential for collision with structures of
obstacles. Consideration must also be given to the proximity of
the User in relation to the anchorage to minimise the potential
for a swing fall arrest where vertical clearance may be adequate
but horizontal clearance may not. Calculation of clearance
heights and swing fall risk should be performed and advised by
a competent person, or by contacting SpanSet UK Ltd.
Clearance height considerations
- Height of anchorage above working level
- Arresting distance of energy absorber
- Height & weight of the User
- Availability of free fall space
NOTE: OTHER FACTORS MAY ALSO BE CONSIDERED
WHICH ARE SPECIFIC TO PRODUCT TYPES AND
APPLICATION
ANCHORAGES
All anchor points must satisfy the requirements of EN795 (MBS
12kN). Whenever possible; select anchor points which limit the
height of any potential fall i.e. above the User's head height.
Select locations of attachment which will not allow the PPE to
contact aggressive or abrasive surfaces.

GENERAL INFORMATION

OPERATING TEMPERATURE
-35°C to +75°C
STORAGE OF PRODUCT
- Cool well ventilated area
- Do not store under heavy items
- Do not expose to UV
- Prevent contact with sharp objects that may damage the
fibres of the webbing
CLEANING & DRYING OF PRODUCT
- Wash in a container of 30°C water with mild detergent
- Do not machine wash or pressure wash
- Dry in a well ventilated area allowing the product to drip dry
(maximum +30°C)
- Do not expose to sources of heat or UV
CONTAMINATION
Do not allow contact with harmful substances such as acids,
alkalis, fuel, paints, and solvents.
MODIFICATIONS
No alterations, additions or repairs should be made to this
4
product without the written consent of SpanSet UK Ltd.
TRANSPORTATION
During transportation, the product must be stored away from
direct sunlight and in such a manner as to avoid contamination
with chemicals, dirt ingress and mechanical damage. It is
strongly recommended that the product is transported in the
protective bag supplied with the product or other suitable
means.
PRODUCT LIFESPAN
It is mandatory by European Law that all PPE must be supplied
with comprehensive User Instructions which detail the lifespan
of the product, and the inspection requirements. The actual
frequency of the periodic inspection is the responsibility of
the competent person in charge of the maintenance of the
product. Aggressive or arduous conditions and constant use
will potentially reduce the working life of the product and so a
more frequent inspection regime will be required to effectively
monitor this. SpanSet recommend that PPE for Work at Height
is thoroughly examined by a competent person:
- Periodically at intervals not exceeding 6 months
- Interim inspections where required
SpanSet recommend that Pre Use inspection is carried out by
the user before each and every use. Any concerns about the
condition of equipment must result in the item undergoing
a thorough interim inspection. In addition SpanSet give this
product a period of obsolescence of 10 years from date of
manufacture, even if never used. Products should be withdrawn
from service if they meet any one of the following criteria:
- Failure of a thorough examination
- Subjected to or used to arrest a fall
- Manufacturer's period of obsolescence (shelf-life) has been
reached
Compatibility and use of PPE is the responsibility of the user.
SpanSet can supply other items of equipment that are
compatible with this product which includes; EN361 fall-arrest
harnesses, a variety of EN362 connectors, work positioning
belts, and adjustable safety lines. SpanSet also supplies a full
range of fall arrest and access equipment, and training either
at site or on our own premises, in all aspects of height safety.
Courses are accredited under our registration to BS8454 and
ISO 9001, with certificates issued on successful completion.
Although it is not compulsory, for the safety of all users SpanSet
recommends you take advantage of this training service, please
contact us for further details.