Spanset Spectre Harness 2 Manual Del Usuario página 2

Spectre Harness 2
GENERAL INFORMATION
Spectre 2 Harness EN 361:2002
SpanSet UK Ltd, Telford way, Middlewich, Cheshire, UK
www.spanset.co.uk
Notified body controlling the manufacture of this ppe
BSI Kitemark Court, Davy Avenue, Knowhill, Milton Keynes, UK
Notified body number: 0086
Notified body for the EC type examination of this PPE SATRA
technology
Wyndham Way, Telford Way, Kettering, UK
Notified body number: 0321
It is essential that this product is sold to the end user with the
instructions in the correct language of the country in which the
product is to be used. This harness is for use in a fall arrest
system that has had a thorough risk-assessment including an
analysis of the clearance height necessary below the user to
ensure safety.
WARNING
Use of this equipment is inherently dangerous, and prior to use
you must:
- Read the User Instruction Manual
- Be trained in the correct use of the product
- Familiarise yourself with the product's operation &
limitations
- Fully understand the risk involved in using the product
- Be physically and medically capable of operating the product
safely and fully understanding its function
All work at height activities are inherently dangerous; your
personal safety is your responsibility. Rescue provision should
always be in place to deal with any emergencies and must be
able to be carried out with maximum efficiency and speed. No
alterations, additions or repairs should be made to this product
without the written consent of SpanSet UK Ltd.
FAILURE TO ADHERE TO THE PRODUCT USER
INSTRUCTIONS OR USE THE PRODUCT CORRECTLY
MAY RESULT IN SERIOUS INJURY OR DEATH.
2
1. PRODUCT MODEL NAME
2. DATE OF MANUFACTURE
3. PRODUCT INDIVIDUAL NUMBER
4. RELEVANT PRODUCT STANDARD
5. REQUIREMENT TO READ USER INSTRUCTIONS
6. NOTIFIED BODY CONTROLLING THE MANUFACTURE
OF THE PRODUCT
PRODUCT APPLICATION
The SPECTRE 2 is an EN361 full body fall arrest harness
designed for personal fall protection for Users with a body mass
of up to 100kg. The product must not be overloaded or used
outside its field of application; personal protection for work at
height. All Users must be trained in work at height activities to a
level of competency or must work under direct visual control of a
competent person prior to use of the product. Use of the product
is at the Users own risk and the User assumes responsibility
for any damages, injuries or death resulting from incorrect use
of the product in any manner whatsoever. If there is any doubt
about the correct use and application of this product do not use
it and seek advice from a competent person or from SpanSet
UK Ltd.
PRE-USE CHECKS
Before each use check the function and condition of the product
by operating any moving parts and inspection of the product
elements with particular attention to:
Webbing - check for signs of wear, cuts, abrasion and damage
due to excessive heat or chemical contamination.
Hardware - check for signs of wear, cracks and distortion. If
the hardware has moving parts, ensure that they are free to
move and operate correctly.
Product Label - the label details must be clearly legible
and checked for compatibility for the required work at height
activity. Check the details of the product label to ensure the
product is within its operating lifespan.
BE AWARE THAT CONTINUOUS MONITORING OF YOUR
EQUIPMENT DURING USE IS CRITICAL TO ENSURING
SAFE WORK AT HEIGHT ACTIVITIES.
PRODUCT COMPATIBILITY
Always ensure, via specific training or advice from a
competent person, that the intended application of PPE is
compatible with the products used. It cannot be assumed