Maintenance And Cleaning - Saivod LST1261 Manual Del Usuario

Loading door lock
There is a locking system on the loading door of
the machine that prevents opening of the door in
cases when the water level is unsuitable.
When machine is switched to Pause mode, it
checks the level of the water inside. If the level is
suitable, Loading Door light illuminates steadily
within 1-2 minutes and the loading door can be
opened.
If the Loading Door light is not on, Loading Door
cannot be opened. If you are obliged to open
the Loading Door while the Loading Door light is
off, you must cancel the current programme; see
"Canceling the programme".
Changing the selections after
programme has started
To change your settings after the program has
started, you have to switch the machine to Pause
mode first.
Even if you select a new program by
C
changing the position of the Programme
Selection knob while the machine is running
or in Pause mode, the programme selected
first will continue. You must cancel the
current programme to change the washing
programme. See "Canceling the programme".
Changing the auxiliary function, speed and
temperature
Depending on the step the programme has
reached, you can cancel or activate the auxiliary
functions; see, "Auxiliary function selection".
You can also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
Adding or taking out laundry
Press Start / Pause / Cancel button to switch the
machine to pause mode. Wait until the Loading
Door can be opened.
If the Loading Door light does not turn
C
on in 1-2 minutes, it means that the water level
in the machine is not suitable and laundry cannot
be added. You can resume the programme by
pressing Start / Pause / Cancel button. Open the
Loading Door and add or take out the laundry.
Close the Loading Door. Make changes in auxiliary
functions, temperature and speed settings if
necessary. Press Start / Pause / Cancel button to
start the machine.
Canceling the programme
Press and hold Start / Pause / Cancel button for 3
seconds to cancel the current programme. At the
end of this period, machine can drain the water
inside it or can take in and drain water up to 3
times to cool down the laundry. Washing and End
lights turn on.
Once draining is complete, Start / Pause / Cancel
and Washing lights turn off, and Loading Door light
starts flashing.
When the Loading Door is openable, Loading Door
light turns on and remains lit. In this case, you can select and start the new programme.
End of programme
End light in the programme follow-up indicator will
light up once the programme comes to an end.
Press On / Off button to switch off the machine.
Take out your laundry and close the loading door.
Your machine is ready for the next washing cycle.

5 Maintenance and cleaning

Service life of the product extends and frequently
faced problems decrease if cleaned at regular
intervals.
Cleaning the detergent drawer
Clean the detergent drawer at regular intervals
(every 4-5 washing cycles) as shown below in order to prevent accumulation of powder
detergent in time.
Press the dotted point on the siphon in the
softener compartment and pull towards you until
the compartment is removed from the machine.
If more than normal amount of water and
C
softener mixture starts to gather in the
softener compartment, the siphon must be
cleaned.
Wash the detergent drawer and the siphon with
plenty of lukewarm water in a washbasin. Wear
protective gloves or use an appropriate brush to
avoid touching of the residues in the drawer with
your skin when cleaning. Insert the drawer back
into its place after cleaning and make sure that it is
seated well.
Cleaning the water intake filters
There is a filter at the end of each water intake
valve at the rear of the machine and also at the
end of each water intake hose where they are
connected to the tap. These filters prevent foreign
substances and dirt in the water to enter the
washing machine. Filters should be cleaned as
they do get dirty.
13
EN