Preparing The Appliance For Use; Ingredients And Tips; English - Philips HR1821 Manual Del Usuario

E Drive shaft
F Juice cup (type HR1821 only)
g Juice cup lid with integrated foam separator (type HR1821 only)
H Pulp container
i
Pulp collector
J Spout
k Sieve
l Lid
m Feed tube
n Pusher

Preparing the appliance for use

1 Wash all detachable parts (see section 'Cleaning').
 Wind the mains cord from the reel on the base of the appliance (Fig. ).
 Attach the pulp container to the motor unit. You hear a click when it locks in place (Fig. ).
 Slide the spout into the pulp collector and push it until you hear a click (Fig. ).
5 Place the pulp collector onto the motor unit (Fig. 5).
6 Put the sieve in the pulp collector (Fig. 6).
Always check the sieve before use. If you detect any cracks or damage, do not use the appliance
and contact the nearest Philips service centre or take the appliance to your dealer.
7 Place the lid on the pulp collector (Fig. 7).
Make sure that the hook on the lid fits into the hole of the pulp collector.
8 Snap the two latches onto the lid to lock it into place (click).
9 Place the juice cup or a glass under the spout.
10 Put the plug in the wall socket.

Ingredients and tips

- Use fresh fruit and vegetables; they contain more juice. Particularly suitable for processing in the
juice extractor are pineapples, beetroots, celery stalks, apples, cucumbers, carrots, spinach,
melons, tomatoes, oranges and grapes.
- You do not have to remove thin peels or skins. Only remove thick peels, e.g. those of oranges,
pineapples and uncooked beetroots. Also remove the white pith of citrus fruits because it has a
bitter taste.
- When you prepare apple juice, remember that the thickness of the apple juice depends on the
apple you are using. The juicier the apple the thinner the juice. Choose an apple that produces
the type of juice you prefer.
- Apple juice turns brown very quickly. You can slow down this process by adding a few drops of
lemon juice.
- Fruits that contain starch, such as bananas, papayas, avocados, figs and mangoes are not suitable
for processing in the juice extractor. Use a food processor, blender or bar blender to process
these fruits.
- Leaves and leafstalks of e.g. lettuce can also be processed in the juice extractor.
- Drink the juice immediately after you have extracted it. If it is exposed to air for some time, the
juice will lose its taste and nutritional value.

EnglisH

7