Wayne Dalton Prodrive 3220C Instrucciones De Instalación Y Manual Del Propietario página 26

Tools Needed:
Needle Nose Pliers TO AVOID ELECTRICAL SHOCK,
DISCONNECT POWER AT THE FUSE/
Pliers/Wire Cutters
BREAKER BOX BEFORE PROCEEDING.
Flat Tip
IMPORTANT: CHECK YOUR LOCAL
Screwdriver
ELECTRICAL CODES. IF YOUR LOCAL CODE
REQUIRES PERMANENT WIRING, USE THE
SPECIFICATIONS CALLED FOR AND
INSTRUCTIONS ILLUSTRATED.
Permanent Wiring Procedure
1. Ensure power cord is disconnected from
2. Cut power cord 1/2" – 1" from strain
3. Use needle nose pliers to remove strain
4. Pull or strip off remaining section of outer
5. Remove lens by pressing up on both sides
6. Remove the housing from the chassis by
7. Pull the three wires into the opener;
8. Using wire nuts for 14-18 AWG wire,
9. Replace opener cover.
Reconnect the power at the fuse/ breaker
box, as soon as power is applied to the unit,
the light on the opener will blink once to
indicate a successful self check of the
controls.
20
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
Power Connection
(Permanent Wiring Option)
WARNING
electrical power.
relief/bushing.
relief bushing from frame. Squeeze tabs in
on underside of bushing and work bushing
out of hole.
insulation from power cord.
of the bottom of the lens at the junction of
the housing, releasing the locking tabs,
and pulling forward; remove light bulb (if
installed).
removing the screw securing the
housing to the chassis. Press on the
locking tabs and slide the cover off the
chassis.
strip 1/2" of insulation from the black,
white, and green wires.
connect the black wire to black wire, the
white wire to white wire and the green
wire to green wire. Make sure connections
are secure.
Power Cord
Strain Relief Bushing
Strain Relief
Bushing
Housing
Tabs
Live & Neutral
1/2" To 1"
Opener
Tab
Tabs
Chassis
Screw
Light Bulb
Ground
Wire Nuts
Lens