Planetary Mixer – Technical Assistance Manual
Procedure P003
MIXER GEARBOX - Eliminating oil leakage between the fixed gearbox and the rotary planetary gear cover
8. Proceed with reassembly in the reverse order of that described above, being careful to reassemble the oil seal
holder flange at the end, performing the conical roller bearings pre-load as described in procedure P001.
Before closing the planetary gearbox, lubricate the upper bearing of the planetary gear output shaft with
approximately 1 Kg of grease (for grease type see the User Manual).
9503G0002_ING_P003.docx rev. 8, 12/09/2011 17.00.00
ENGLISH
2/2
