Technical Data - Facom CL3.R10J Manual Original

página de 263

/ 263
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

Square Drive

Voltage VDC 18

Type

Battery Type

No load speed

Max Torque N.m

Weight (without battery pack) kg

Noise values and vibration values (triax vector sum) according to EN60745-2-2

LPA (emission sound pressure level) dB(A)

LWA (sound power level) dB(A)

KWA (uncertainty for the given sound level) dB(A)

Tightening of fasteners at the maximum capacity of the tool

Vibration emission value ah = m/s2

Uncertainty K = m/s2

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to

compare one tool with another. It may be used for a preliminary assessment of exposure

WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with

different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually

doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from

the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.

Maintenance

Your FACOM power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of serious personal injury, place the forward/reverse button in the lock-off position or turn tool off and

disconnect battery pack before making any adjustments or removing/installing attachments or accessories.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken

the plastic materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never

immerse any part of the tool into a liquid.