Waring Commercial BLADE BB300 Serie Manual De Instrucciones página 10

NOTE: IN ORDER TO MINIMIZE POSSIBILITY OF
SCALDING, TEMPERATURE OF WASHING SOLUTION
AND RINSE WATER MUST NOT EXCEED 115˚F (46˚C),
AND QUANTITY USED MUST NOT EXCEED ONE-
QUARTER JAR FULL.
TO SANITIZE AND DRY CONTAINER
1. Wipe down exterior of jar with a soft cloth
or sponge dampened with sanitizing solution.
2. Fill jar with sanitizing solution, cover, place on motor
base, and run on HIGH speed for one (1) minute. Empty
jar. Dislodge any residual moisture from blade assembly
by placing empty jar on motor base and running on
HIGH speed for two (2) seconds.
3. Sanitize lid and lid insert by immersing in sanitizing
solution for two (2) minutes.
4. Do not rinse jar, lid, or lid insert after sanitizing
is completed. Allow parts to air-dry.
TO CLEAN AND SANITIZE MOTOR BASE
1. UNPLUG POWER CORD. Wipe down exterior surfaces
of motor base with soft cloths or sponges dampened
with washing solution, rinse water, and sanitizing
solution. Prevent liquid from running into motor base
by wringing all excess moisture from cloths or sponges
before using them.
DO NOT IMMERSE MOTOR BASE IN WASHING SOLUTION,
RINSE WATER OR SANITIZING SOLUTION.
2. Allow motor base to air-dry before using.
IMPORTANT
10