WARNING
Afterremovingtherechargeablebattery,donot
keepitwithinthereachofchildrenandinfants.
- The battery will harm the body if accidentally swallowed.
If this happens, consult a physician immediately.
Ifthebatteryfluidleaksout,takethefollowing
procedures.Donottouchthebatterywithyourbare
hands.
- The battery fluid may cause blindness if it comes in
contact with your eyes.
Do not rub your eyes. Wash immediately with clean water
and consult a physician.
- The battery fluid may cause inflammation or injury if it
comes in contact with the skin or clothes.
Wash it off thoroughly with clean water and consult a
physician.
Intendeduse
• Do not put salt, mouthwash or other chemicals into the water
tank. Doing so may cause malfunction.
• Do not dry the main unit with a dryer or a fan heater. Doing so
may cause malfunction or deformation of the parts.
• Do not wipe with thinners, benzine, alcohol etc. Doing so may
cause malfunction, cracking or discoloration of the parts.
• Store the appliance in a place with low humidity after use.
Leaving the appliance in a bathroom may cause malfunction.
8
EW1211A_US.indb
8
Partsidentification
Front
Back
AMainunit
1 Nozzle release button
2 Power switch [0/1]
3 Mode switch
4 Mode indicator
5 Charging indicator
6 Ventilation hole
7 Suction hose
8 Filter
9 Water tank
Water tank cap
BCharger(RE8-53)
Charging section
Note
There may be moisture inside the main unit (water tank and
suction hose). This is moisture left from the distilled water used
for product testing and is hygienically safe.
Cord
Power plug
> Nozzle stands
? Screw holes for wall mounting
The charger can be mounted
on a wall using two wood
screws.
CNozzle(x2)
@ Nozzle
A Identification ring
B Nozzle handle
Accessories
D2screws
2014/07/11
16:48:20