Troubleshooting - Urrea SCB1120 Manual De Usuario Y Garantía

with a sufficient amount of high grade lubricant
for the life of the unit under normal conditions.
Therefore, no further lubrication is required.

TROUBLESHOOTING

PROBLEM
Teeth are dull. This is
caused by hitting a
hard object such as a
The saw does nail, dulling teeth on
not work one side.
The blade tends to cut
to the side with the
sharpest teeth.
The saw does
not work and
the tool LED The tool is overheated.
worklight
flashes.
The saw does
not work and
two battery The battery is
pack LED overheated.
lights alter-
nately flash.
The saw does
not work and
The battery is in
the battery
overloaded protection.
pack LED
lights flash.
Cutting is
Saw blade is worn out.
difficult.
20
CAUSE SOLUTION
Charge the
battery.
Allow the
tool to cool
down.
Allow the
battery to
cool down.
Do not force
the cut.
Replace the
saw blade.