Software Upgrade - Surix iP Access Manual Del Usuario

Manual de Portero IP v 9.0
SURiX IP Access
Versión de software (desde) 3.20

Software Upgrade

The submenu: contains the following elements
New version: XXX (file ipax.XXX)
Firmware for upgrading is located in file which name is ipax.XXX, where XXX are 3 digits
from 000 to 999. This field must be set with 3 digits according to new version to install to
iP Access.
TFTP server IP Address
The file with firmware to upload, must be located in a TFTP server, and his address must
be set in this field.
Upgrade Status
Read only item that shows if there is an upgrade in execution
At footpage, there is a button for launching upload:
• UPGRADE:
Whenk click on this button, the uploading process is launched.
NOTE: When upload is finished, the iP Access takes more than 1 minute to proccess new
firmware.. DO NOT UNPLUG POWER SUPPLY AT THIS TIME
Página 38 de 39