Surix iP Access Manual Del Usuario página 25

NOTES:
• If your network does not include those address ranges, you can switch,
momentarily, the computer configuration that will program the product, removing
DHCP and writing a fixed address in the address range of the iP Access.
• If you want to program it out of a network environment, you can do it, taking into
account the address (previous item) and, also, installing a crossover patch cord
UTP between the computer and the iP Access.
The iP Access will response with the programming password entry screen:
The On Line Manual button is available in all menus and (if you have internet access),
when pressed, opens a new web window with access to this manual in pdf format. You can
download to the computer hard disk or watch it on line.
The factory default password is: sx1234
Programming password or IP address forgotten
• If the programming had been changed or it is unknown, follow the next restart sequence,
that allow to work with the factory default settings: IP address and programming password
(the programmed IP values and password, remain unchanged, the jumper only set
temporarily those values)
▪ Turn off the product
▪ Place a mini-jumper in position indicated
in the picture
▪ Turn on the product
▪ Enter in the URL programming
http://10.0.0.100:8085 with password sx1234
▪ Modify the desired programming parameters
▪ Turn off the product
▪ Remove the jumper between the contacts
▪ Turn on the product
=>
Página 25 de 39
Manual de Portero IP v 9.0
SURiX IP Access
Versión de software (desde) 3.20
Hardware Hardware
ipac-04
ipac-08