Surix iP Access Manual Del Usuario página 32

Manual de Portero IP v 9.0
SURiX IP Access
Versión de software (desde) 3.20
Video parameters
In the submenu: you can see the following elements to program:
iP Access can make video calls, through linking to an IP camera which must be in the
same LAN if iP Access, supports RTSP protocol and generates video H.264.
For that, some settings about the camera must be programmed to iP Access, as IP
address, port and brand of the camera.
NOTE: The functioning can vary according the brand of the camera.
Camera Registered
This read only item, shows if iP Access has established the link with the camera in order
to make video calls.
Enable video camera
Enables or disables this feature
Camera IP address
It must be static (camera must not enable DHCP service)
IP Port of camera
Usually 5554
Select the camera to be used
There are several models and brands of know cameras which features are
preprogrammed in iP Acces. If your camera is not in this list, contact our technical
support.
Página 32 de 39