Surix iP Access Manual Del Usuario página 30

Manual de Portero IP v 9.0
SURiX IP Access
Versión de software (desde) 3.20
Prog Key X / Button X
After programming the action of the key or button , the element is
programmed; this determines which digit, extension number or IP address is issued when
this key or button is pressed (in case of Button programmed as Manual Door opening,
which relay is activated when the button is pressed. Remember that relay no 2, may work
as normal open or normal closed, depending the connection of a mini jumper in PCB)
For programming of the dialing digits, the values 0 to 9 are used to numbers, 10 is used
for * (asterisk) and 11 for # (pound) if this dialing is required.
Comunication Parameters
In submenu : you can see the following elements to program.
Parameters that will be used by IP Access for the communication.
My IP address (iP Access)
Is the IP address that will have the IP Access for all IP communications.
Its value by default is 10.0.0.100 . If you change this address, the following accesses to
programming webserver, will have direct to: http://new_address:8085
Página 30 de 39